FD 310
FD 310
Cartridge dispenser
-
2.4Weight in kilograms
-
135 x 145 x 410Dimensions in millimeters
-
310 mlContainer
-
Adhesives, siliconesApplication
-
150,000 - 3,000,000Approximate viscosities in centipoise
Documentation
Features
The latest addition to the FD series. Uses compressed air to feed the dosing pump without affecting the dosing quality. Designed for 310 ml cartridges. Maintains a modular system, making it easy to switch to FD 400 and FD HighV.
Built for Collaborative Robots
-
Native Universal Robots e-Series and CB support
-
Single 8-pin connector - no need for air lines or bulky power cables
-
Suitable for robots with a payload of 3 kg and up
Easy to Use
-
Plug&Dispense - get started in 10 minutes
-
One easy-to-use software interface for all products
-
All-in-one solution - full control over the dispensing parameters from the robot
Quality Control
-
Airless technology ensures minimal flow variation
-
Patented SteadyFlow technology ensures synchronous flow with robot TCP speed
-
Automatic error detection and operator alert
Exchangeable Auger Screws
-
5 mm pitch - for high inherent resistance and low flow rate
-
7.5 mm pitch - for moderate inherent resistance and flow rate
-
10 mm pitch - for low inherent resistance and high flow rate
Setting Up the FD 310
Play Video
Frequently Asked Questions
Access common questions and answers with a single click on the tabs below.
The dispenser uses 310 ml cartridges.
However, all the FD series dispensers are modular, making it easy to support external feed and 400 ml cartridges using an adapter kit.
Native support is limited to URe series cobots, yet you can use most cobots to drive our units by IO and our shared protocols.
